I was looking to get the H&R' hubcentric spacers (15mm front - 25mm back)for my 2012 coupe but i dont know which ones to choose, these are the options:
I read the description between all three but i still dont see a difference.
Can someone please shed some light? Can anyone with the H&R's chime in and let me know which ones you chose and why?
For the Accord, only the DRS and DRM are applicable. DRA style is for European cars that use wheel bolts instead of studs.
H&R use the DRS style for 5mm,10mm and 15mm spacers.
For 20mm and 25mm spacers, the DRM is used. The spacer bolts to the OEM studs using supplied "shorty" nuts. The wheel bolts to the spacer, which has new wheel studs already installed in the spacer.
On an 8G with OE wheels (55 offset) 20 mm front, and 25mm rears are about perfect, so it is an easy install with no need to mess with the OE studs. If you're dropped more than an HFP kit, someone else will have to confirm the fitment. The measuring instructions show you how to check.
H&R make really high quality bits, and the fit is perfect. If you check their website, they have a lot of good info on how to measure, application guides etc.